Cold Saw/V1 Design Files/Base Disc: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
| Line 11: | Line 11: | ||
*'''Mount Hole Diameter: 12mm''' | *'''Mount Hole Diameter: 12mm with 20mm DIA counterbore''' | ||
*'''Mount Hole Spacing as Center Rectangle: 60mm by 100mm''' | *'''Mount Hole Spacing as Center Rectangle: 60mm by 100mm''' | ||
| Line 17: | Line 17: | ||
*'''Vise Hole Diameter: | *'''Vise Hole Diameter: 10.5mm DIA then M12x1.75 Tap''' | ||
*'''Vise Hole Spacing as Center Rectangle: 90mm by 40mm''' | *'''Vise Hole Spacing as Center Rectangle: 90mm by 40mm''' | ||
Revision as of 19:34, 3 June 2012
Base Disc
- First Outside Diameter: 152.4mm
- First Thickness: 26mm
- Second Outside Diameter: 140mm
- Second Thickness: 12.1mm
- Mount Hole Diameter: 12mm with 20mm DIA counterbore
- Mount Hole Spacing as Center Rectangle: 60mm by 100mm
- Vise Hole Diameter: 10.5mm DIA then M12x1.75 Tap
- Vise Hole Spacing as Center Rectangle: 90mm by 40mm
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF