Cold Saw/V1 Design Files/Clamp Block: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
(Created page with "=Clamp Block= *'''Length: 50mm''' *'''Width: 25.4mm''' *'''Height: 25.4mm''' *'''Jaw Hole Height: 13mm''' *'''Jaw Hole Spacing Along Length: 30mm''' *'''2D Image''' [[Ima...") |
|||
| Line 7: | Line 7: | ||
*'''Height: 25.4mm''' | *'''Height: 25.4mm''' | ||
*'''Jaw Hole Diameter: 10.5mm DIA then M12x1.75 Tap''' | |||
*'''Jaw Hole Height: 13mm''' | *'''Jaw Hole Height: 13mm''' | ||
*'''Jaw Hole Spacing Along Length: 30mm''' | *'''Jaw Hole Spacing Along Length: 30mm''' | ||
*'''2D Image''' | *'''2D Image''' | ||
Revision as of 22:34, 7 June 2012
Clamp Block
- Length: 50mm
- Width: 25.4mm
- Height: 25.4mm
- Jaw Hole Diameter: 10.5mm DIA then M12x1.75 Tap
- Jaw Hole Height: 13mm
- Jaw Hole Spacing Along Length: 30mm
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF