Cold Saw/V1 Design Files/Base Flat: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
(Created page with " *'''Thickness: 25.4mm''' *'''Width: 127mm''' *'''Length: 350mm''' *'''Swivel Hole Diameter: 30mm''' *'''Swivel Hole Along Length: Centered''' *'''Swivel Hole Along Width:...") |
No edit summary |
||
| Line 1: | Line 1: | ||
*'''Thickness: 25.4mm''' | *'''Thickness: 25.4mm''' | ||
| Line 8: | Line 7: | ||
*''' | *'''Base Hole Diameter: 12mm''' | ||
*''' | *'''Base Hole Rectangle: 100mm x 300mm''' | ||
*''' | *'''Base Hole Rectangle Positioning: Centered''' | ||
*'''Vise Hole Diameter: 10.5mm then M12x1.75 Tap''' | *'''Vise Hole Diameter: 10.5mm then M12x1.75 Tap''' | ||
*'''Vise Hole Rectangle: | *'''Vise Hole Rectangle: 50mm x 90mm''' | ||
*'''Vise Hole Rectangle Positioning: Centered | *'''Vise Hole Rectangle Positioning: Centered''' | ||
| Line 25: | Line 24: | ||
*'''2D Image''' | *'''2D Image''' | ||
[[Image: | [[Image: ColdSawV1BaseFlat.jpg|500px]] | ||
*'''3D CAD STP''' | *'''3D CAD STP''' | ||
[[File: | [[File: ColdSawV1BaseFlat.stp]] | ||
*'''2D Fabrication Drawing PDF''' | *'''2D Fabrication Drawing PDF''' | ||
[[File: | [[File: ColdSawV1BaseFlat.pdf]] | ||
*'''2D Fabrication Drawing DXF''' | *'''2D Fabrication Drawing DXF''' | ||
[[File: | [[File: ColdSawV1BaseFlat.dxf]] | ||
Revision as of 23:07, 11 June 2012
- Thickness: 25.4mm
- Width: 127mm
- Length: 350mm
- Base Hole Diameter: 12mm
- Base Hole Rectangle: 100mm x 300mm
- Base Hole Rectangle Positioning: Centered
- Vise Hole Diameter: 10.5mm then M12x1.75 Tap
- Vise Hole Rectangle: 50mm x 90mm
- Vise Hole Rectangle Positioning: Centered
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF