Cold Saw/V1 Design Files/Base Flat: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
*'''Thickness: 25.4mm''' | *'''Thickness: 25.4mm''' | ||
| Line 9: | Line 8: | ||
*'''Base Hole Diameter: 12mm''' | *'''Base Hole Diameter: 12mm''' | ||
*'''Base Hole Rectangle: | *'''Base Hole Rectangle: 80mm x 300mm''' | ||
*'''Base Hole Rectangle Positioning: Centered''' | *'''Base Hole Rectangle Positioning: Centered''' | ||
Revision as of 23:12, 11 June 2012
- Thickness: 25.4mm
- Width: 127mm
- Length: 350mm
- Base Hole Diameter: 12mm
- Base Hole Rectangle: 80mm x 300mm
- Base Hole Rectangle Positioning: Centered
- Vise Hole Diameter: 10.5mm then M12x1.75 Tap
- Vise Hole Rectangle: 50mm x 90mm
- Vise Hole Rectangle Positioning: Centered
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF