Cold Saw/V1 Design Files/Base Flat: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
*'''Thickness: 25.4mm'''
=3D Model=
 
*'''Width: 127mm'''
 
*'''Length: 600mm'''
 
 
*'''Base Hole Diameter: 12mm with 20mm DIA 13 DEEP counterbore'''
 
*'''Base Hole Rectangle: 80mm x 520mm'''
 
*'''Base Hole Rectangle Positioning: Centered'''
 
 
*'''Vise Hole Diameter: 10.5mm then M12x1.75 Tap'''
 
*'''Vise Hole Rectangle: 50mm x 90mm'''
 
*'''Vise Hole Rectangle Positioning: Centered'''
 
 
 
*'''2D Image'''


[[Image: ColdSawV1BaseFlat.jpg|500px]]
[[Image: ColdSawV1BaseFlat.jpg|500px]]
*'''3D CAD STP'''


[[File: ColdSawV1BaseFlat.stp]]
[[File: ColdSawV1BaseFlat.stp]]


*'''2D Fabrication Drawing PDF'''
=2D Drawing
 
[[File: ColdSawV1BaseFlat.pdf]]
 
*'''2D Fabrication Drawing DXF'''


[[File: ColdSawV1BaseFlat.dxf]]
[[File: ColdSawV1BaseFlatD.jpg]]

Revision as of 23:39, 28 June 2012

3D Model

ColdSawV1BaseFlat.jpg

File:ColdSawV1BaseFlat.stp

=2D Drawing

ColdSawV1BaseFlatD.jpg

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Files/Base_Flat&oldid=67773"