Cold Saw/Understand4: Difference between revisions
< Cold Saw
Jump to navigation
Jump to search
(Created page with "=Vise= The vise holds the material to be cut. =Diagram= =Dimensions= =Parts= =Next=") |
|||
| Line 6: | Line 6: | ||
=Dimensions= | =Dimensions= | ||
The mounting holes for the vise are 12mm diameter to fit the M12x1.75 screws used uniformly. | |||
The vise shafts are 31.8mm diameter, the same diameter as in the rotation assembly. | |||
The vise threaded rod is M30x3.5 to fit within 32mm diameter holes uniformly used for the vise shafts. | |||
=Parts= | =Parts= | ||
=Next= | =Next= | ||
Revision as of 21:46, 25 June 2012
Vise
The vise holds the material to be cut.
Diagram
Dimensions
The mounting holes for the vise are 12mm diameter to fit the M12x1.75 screws used uniformly.
The vise shafts are 31.8mm diameter, the same diameter as in the rotation assembly.
The vise threaded rod is M30x3.5 to fit within 32mm diameter holes uniformly used for the vise shafts.