Mini Wire Reel: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
=Introduction= | |||
[[Image: miniwirereel.jpg|500px]] | [[Image: miniwirereel.jpg|500px]] | ||
The objective is to keep a small wire neatly rolled and/or separate wires organized together. | |||
=Action Info= | |||
[https://www.amazonsupply.com/dp/B000H9FWNY/ref=sp_dp_g2c_asin Source: 1" Diameter, 72" Length, 6061T6 Aluminum Round Bar] | [https://www.amazonsupply.com/dp/B000H9FWNY/ref=sp_dp_g2c_asin Source: 1" Diameter, 72" Length, 6061T6 Aluminum Round Bar] | ||
Latest revision as of 22:51, 21 September 2012
Introduction
The objective is to keep a small wire neatly rolled and/or separate wires organized together.
Action Info
Source: 1" Diameter, 72" Length, 6061T6 Aluminum Round Bar
3/16" Dia, 72" Length, 6061T6 Aluminum Round Bar
Cut it to length (ex. 100mm)
Drill two 6mm diameter holes; 1 hole spaced 10mm from the end and 1 hole spaced 60mm from the same end. It's better to drill larger diameter holes to give enough tolerance for the rod-bending to come.
Cut the thin aluminum rod to length (ex. 200mm) and bend it to form a C that fits inside the two holes of the larger diameter aluminum rod. Now bend the C slightly outward so that in order to fit it again, you need to bend the C inward each time.