Modular Stove Fabrication Procedure: Difference between revisions
Jump to navigation
Jump to search
(→Step 0) |
(→Step 0) |
||
| Line 4: | Line 4: | ||
==Step | ==Step 1== | ||
Study Concept: 2 boxes with slideable cover plates clamped down. Ash tray and flame deflector plates side in similar fashion. | Study Concept: 2 boxes with slideable cover plates clamped down. Ash tray and flame deflector plates side in similar fashion. | ||
*Cut angle for 2 mitered frames, just like for [[Power Cube 6]] | [[Image:stove.jpg|750px]] | ||
==Step 2== | |||
*Cut angle for 2 mitered frames, just like for [[Power Cube 6]]. | |||
**Use Ironworker for mitered cuts | |||
quality Control: length of members within 1/4" tolerance | |||
[[Image:Miteredframe.png|300px]] | [[Image:Miteredframe.png|300px]] | ||
Then, the build: | Then, the build: | ||
==Step 3== | |||
<html> | <html> | ||
</html> | </html> | ||
Revision as of 20:23, 16 October 2012
BOM
Start with BOM.
Build
Step 1
Study Concept: 2 boxes with slideable cover plates clamped down. Ash tray and flame deflector plates side in similar fashion.
Step 2
- Cut angle for 2 mitered frames, just like for Power Cube 6.
- Use Ironworker for mitered cuts
quality Control: length of members within 1/4" tolerance
Then, the build:
Step 3