Modular Stove Fabrication Procedure: Difference between revisions
Jump to navigation
Jump to search
(→Step 2) |
(→Step 2) |
||
| Line 11: | Line 11: | ||
==Step 2== | ==Step 2== | ||
*Cut angle for 2 mitered frames, just like for [[Power Cube 6]]. | *Cut angle for 2 mitered frames, just like for [[Power Cube 6]]. 1/4"x2"x2" angle BOM: | ||
**[12] - 4' long | |||
**[18] - 2' long | |||
**[6] - 1' long | |||
[[Image:Miteredframe.png|300px]] | [[Image:Miteredframe.png|300px]] | ||
**Use Ironworker for mitered cuts: | **Use Ironworker for mitered cuts: | ||
Revision as of 23:20, 16 October 2012
BOM
Start with BOM.
Build
Step 1
Study Concept: 2 boxes with slideable cover plates clamped down. Ash tray and flame deflector plates side in similar fashion.
Step 2
- Cut angle for 2 mitered frames, just like for Power Cube 6. 1/4"x2"x2" angle BOM:
- [12] - 4' long
- [18] - 2' long
- [6] - 1' long
- Use Ironworker for mitered cuts:
- Result: corners fit together such that all metal angle form flat planes
Quality Control
- 3 corners fit so there is no more than 1/8" space anywhere
- length of members within 1/4" tolerance
Then, the build:
Step 3