Arms DXF Files: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=Quality Control= For the arms to be welded correctly, there are 2 critical quality control points: *It is possible to overlap the two flats to make two different size angles. Ma...") |
|||
| Line 1: | Line 1: | ||
=Master Arms Digital Index= | |||
<html></html> | |||
[ edit] | |||
=Quality Control= | =Quality Control= | ||
For the arms to be welded correctly, there are 2 critical quality control points: | For the arms to be welded correctly, there are 2 critical quality control points: | ||
*It is possible to overlap the two flats to make two different size angles. Make sure that the weldment becomes a 4"x6" angle, not a 4.5"x5.5" angle. | *It is possible to overlap the two flats to make two different size angles. Make sure that the weldment becomes a 4"x6" angle, not a 4.5"x5.5" angle. | ||
*It is possible to weld 2 identical angles or 2 angles that are mirror images of one another. Make sure you make 2 mirror images, not 2 identical angles. | |||
Revision as of 06:22, 12 December 2012
Master Arms Digital Index
[ edit]
Quality Control
For the arms to be welded correctly, there are 2 critical quality control points:
- It is possible to overlap the two flats to make two different size angles. Make sure that the weldment becomes a 4"x6" angle, not a 4.5"x5.5" angle.
- It is possible to weld 2 identical angles or 2 angles that are mirror images of one another. Make sure you make 2 mirror images, not 2 identical angles.