Dairy Milker/Manufacturing Instructions: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 14: | Line 14: | ||
#Drill vacuum hole | #Drill vacuum hole | ||
#Install barb coupler and seal with silicone | #Install barb coupler and seal with silicone | ||
<html><img src="https://docs.google.com/drawings/pub?id=10Pq42mA7_E7_kINm72rdTR_R2TufWdhMH4HVS2kDPLI&w=960&h=720"></html> | |||
]https://docs.google.com/drawings/pub?id=10Pq42mA7_E7_kINm72rdTR_R2TufWdhMH4HVS2kDPLI&w=960&h=720 edit drawing] | |||
[[File:pulsator.jpeg|thumb|Pulsator]] | [[File:pulsator.jpeg|thumb|Pulsator]] | ||
Revision as of 14:18, 20 December 2012
Fabrication Diagrams
Milk Bucket
- Milk Bucket Fabrication Diagram:
- Fabricate milk bucket
- Install gaskets
- Install tubing, pulsator, check valve
Teat Cups If you bought them prefabricated, install inflations and connect to milk and vacuum tubes coming from the milk bucket.
If you are fabricating them:
- Remove plungers from 600 cc syringe
- Drill vacuum hole
- Install barb coupler and seal with silicone
]https://docs.google.com/drawings/pub?id=10Pq42mA7_E7_kINm72rdTR_R2TufWdhMH4HVS2kDPLI&w=960&h=720 edit drawing]
Pulsator
- Pulsator Fabrication Diagram:
- Fabricate pulsator body
- Install gasketry
- Assemble solenoids
- Connect tubing
Vacuum pump
- Install vacuum regulator (if necessary)
- Connect tubing to milk bucket