Dairy Milker/Manufacturing Instructions: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
No edit summary
Line 16: Line 16:
#Connect tubing
#Connect tubing


<html><img src="https://docs.google.com/drawings/pub?id=10Pq42mA7_E7_kINm72rdTR_R2TufWdhMH4HVS2kDPLI&amp;w=200&amp;h=300"></html>
<html><img src="https://docs.google.com/drawings/pub?id=10Pq42mA7_E7_kINm72rdTR_R2TufWdhMH4HVS2kDPLI&amp;w=270&amp;h=390"></html>
[https://docs.google.com/drawings/pub?id=10Pq42mA7_E7_kINm72rdTR_R2TufWdhMH4HVS2kDPLI&w=960&h=720 edit drawing]
[https://docs.google.com/drawings/pub?id=10Pq42mA7_E7_kINm72rdTR_R2TufWdhMH4HVS2kDPLI&w=960&h=720 edit drawing]


Revision as of 16:05, 20 December 2012

Fabrication Diagrams

Milk Bucket

Milk Bucket

  • Milk Bucket Fabrication Diagram:

File:Milkbucket.skp

  1. Fabricate milk bucket
  2. Install gaskets
  3. Install tubing, pulsator, check valve

Teat Cups If you bought them prefabricated, install inflations and connect to milk and vacuum tubes coming from the milk bucket.

If you are fabricating them:

  1. Remove plungers from 600 cc syringe
  2. Drill vacuum hole
  3. Install barb coupler and seal with silicone
  4. Connect tubing

edit drawing

Pulsator

Pulsator

  • Pulsator Fabrication Diagram:

File:Pulsator.skp

  1. Fabricate pulsator body
  2. Install gasketry
  3. Assemble solenoids
  4. Connect tubing

Vacuum pump

  1. Install vacuum regulator (if necessary)
  2. Connect tubing to milk bucket
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Dairy_Milker/Manufacturing_Instructions&oldid=84515"