James Slade Log: Difference between revisions
Jump to navigation
Jump to search
James Slade (talk | contribs) |
James Slade (talk | contribs) |
||
| Line 47: | Line 47: | ||
=Time Log= | =Time Log= | ||
[https://docs.google.com/spreadsheet/ | [https://docs.google.com/spreadsheet/ccc?key=0AhoET3RVh7_YdDZIQ3hzeHg4b3cyQnEtQTh4R2N0eHc#gid=0 Time Sheet] | ||
Revision as of 23:20, 7 August 2013
Tue Aug 6 2013
PCB Design
- See CEB_Press/Manufacturing_Instructions/Detroit_Fab_Lab_Solenoid_Driver_v4
- See code - [1] - updated July 2013
- Design software runs in Wine on Ubuntu - [2]
- Arduino - [3]
- Cable - [4]
- Relay - [5]
- 12V to 5V supply - [6]
- Buttons - [7]
- Code for Diecimila to Teensy - [8] - convert Diecimila to Teensy
- Real Terminals - [9]
- Or Yoonseo Terminal - [10]
Design Rationale for Zach's CEB Controller -
- Switch from automatic to manual mode - toggle
- For drawer - you calibrate it and move it a certain percentage.
- For drawer - end positions via pressure sensor
- Replace pause with auto/manual switch
PCB of Board - [11]
![[11]](https://github.com/OSE/ceb-controller/blob/master/dwielcode/board/cebpress-controller-schematic-v4.png){kind=link}
- Design Have plugin into main board
- Uses Arduino Teensy
- 6 buttons - forward back up down pause shaker; timing knobs - 1 for main cylinder - to select brick thickness based on a given power source; 1 for drawer cylinder
- http://www.ladyada.net/library/pcb/manufacturers.html
Sunday 4 2013
PCB designs
Sitting down and looking into PCB design for the CEB's. These will be professionally made to save time and also designed to be robust enough for outdoor, all weather use.
2 hours
Saturday 3 2013
Log Start
- Evaluate current requests from FeF and determine cost, time, and workflow
- Setup Log
Had a late day getting started as there were unexpected issues here in moving my truck from Creation Flame to a shop in town. This will become 1983 Chevy Blazer 6.2 diesel mobile 4x4 power cube with a turbo. :)