Power Cube - Build Videos: Difference between revisions
No edit summary |
No edit summary |
||
| Line 13: | Line 13: | ||
<html><iframe width="420" height="315" src="//www.youtube.com/embed/IMfLy0E-h-s" frameborder="0" allowfullscreen></iframe></html> | <html><iframe width="420" height="315" src="//www.youtube.com/embed/IMfLy0E-h-s" frameborder="0" allowfullscreen></iframe></html> | ||
(45 minutes) | (45 minutes. Most of the 2 hours was spent on shifting tubes and figuring out bolt pattern in real life. Expected build time (inserting and mounting 24 bolts, plus 8 bolts for stabilizing plates for Power Cube) once procedure is set is under 1 hour.) | ||
Then you bring the tractor in: | Then you bring the tractor in: | ||
Revision as of 13:44, 25 September 2013
Using cutting stops, it takes 40 minutes to cut with torch and grind edges of 12 Power Cube frame members, 32", 40", 48" long - out of 10' stock sections.
(15 sec = 40 minutes on time lapse every 5 seconds)
Then you build the frame around a 27 hp Power Cube:
(1 hour 15 minutes)
(45 minutes. Most of the 2 hours was spent on shifting tubes and figuring out bolt pattern in real life. Expected build time (inserting and mounting 24 bolts, plus 8 bolts for stabilizing plates for Power Cube) once procedure is set is under 1 hour.)
Then you bring the tractor in:
(1 hour 6 minutes - included remounting loose power cube (1) on LT 6, replacing 2 bolts on the LT 6 power cube compartment, and replacing 4 bolts on the Power Cube (2) - to remove bolt conflicts)
And mount the Power Cube on the tractor: