Backhoe Stick Test Driven Design: Difference between revisions
Jump to navigation
Jump to search
(Created page with "Based on the Backhoe Stick Range of Motion Analysis, we can put a 2x3 hole plate at the end of a 6 foot stick, and mount the pivot plate 8" away from the boom edge of the ...") |
No edit summary |
||
| Line 1: | Line 1: | ||
Based on the [[Backhoe Stick Range of Motion Analysis]], we can put a 2x3 hole plate at the end of a 6 foot stick, and mount the pivot plate 8" away from the boom edge of the stick. | Based on the [[Backhoe Stick Range of Motion Analysis]], we can put a 2x3 hole plate at the end of a 6 foot stick, and mount the pivot plate 8" away from the boom edge of the stick. | ||
#The 2x3 holeplate has 4 of the 6 holes exposed as possible mounting positions (2 are bolted to the end of the stick), and there are two holes on the bottom side of the stick. | |||
Latest revision as of 02:02, 22 October 2013
Based on the Backhoe Stick Range of Motion Analysis, we can put a 2x3 hole plate at the end of a 6 foot stick, and mount the pivot plate 8" away from the boom edge of the stick.
- The 2x3 holeplate has 4 of the 6 holes exposed as possible mounting positions (2 are bolted to the end of the stick), and there are two holes on the bottom side of the stick.