Trencher File for DXF Cutting: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
Plates sent for CNC cutting - [[File:trencherdxfs.zip]] - 3.8" hole for 2 small plates, 5' diameter cutter, and 18 teeth.
Plates sent for CNC cutting - [[File:trencherdxfs.zip]]
 
Contents:
*[2] pieces - wheel hub plate, 8 hole pattern for fitting 1" bolts. 3.8" hole in plate to weld a 3" ID DOM.
*[1] 5 foot diameter cutter wheel
*[18] teeth

Revision as of 23:47, 14 November 2013

Plates sent for CNC cutting - File:Trencherdxfs.zip

Contents:

  • [2] pieces - wheel hub plate, 8 hole pattern for fitting 1" bolts. 3.8" hole in plate to weld a 3" ID DOM.
  • [1] 5 foot diameter cutter wheel
  • [18] teeth
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Trencher_File_for_DXF_Cutting&oldid=111187"