Revision as of 14:49, 10 June 2014

2014 June 10 Tuesday

First day of work. Attended orientation, began worklog, hit the ground running.
Worked on CEB Press Drawer Module documentation
Oriented self to basic CEB Press operation, brick compression process
Swarmed on getting 3D printers up and running - worked on HYDRA Lulzbot. Got it connected to computer, leveled printbed pretty well. Ran into troubles with .gcode files - printer randomly stops prematurely, causing print to fail. Looks like Colten had similar troubles: Colten Jackson Log
Successfully printed an Octopus on the TAZ out of pink PLA plastic:

Arrived at Factor-e Farm. Got settled in, setup living situation, met team.

@@ Line 1: / Line 1: @@
+=2014 June 10 Tuesday=
+*Presented 3D printing results at morning meeting
+*Began work on CEB Press .SKP
 =2014 June 9 Monday=
@@ Line 6: / Line 8: @@
 *Oriented self to basic CEB Press operation, brick compression process
 *Swarmed on getting 3D printers up and running - worked on HYDRA Lulzbot. Got it connected to computer, leveled printbed pretty well. Ran into troubles with .gcode files - printer randomly stops prematurely, causing print to fail. Looks like Colten had similar troubles: [[Colten Jackson Log]]
+*Successfully printed an Octopus on the TAZ out of pink PLA plastic:
+[[File:3D print PLA Octopus.jpg|540px]]
 =2014 June 8 Sunday=
 Arrived at Factor-e Farm. Got settled in, setup living situation, met team.