The Liberator Full Release - Mechanical Fabrication: Difference between revisions
Jump to navigation
Jump to search
(→Drawer) |
(→Frame) |
||
| Line 1: | Line 1: | ||
=Frame= | =Frame= | ||
The fabrication procedure for the frame is the same as that found in Prototype 1. You can use that as a fabrication guide. The conceptual drawings are here, and step-by-step pictures of frame fabrication are pictures 1-10 shown here. | |||
==Structure== | ==Structure== | ||
==Cylinder Attachment== | ==Cylinder Attachment== | ||
Revision as of 20:28, 31 May 2010
Frame
The fabrication procedure for the frame is the same as that found in Prototype 1. You can use that as a fabrication guide. The conceptual drawings are here, and step-by-step pictures of frame fabrication are pictures 1-10 shown here.