Oxy-Propane Cutting: Difference between revisions
Jump to navigation
Jump to search
(Created page with "We know of oxypropane cutting like this - https://www.youtube.com/watch?v=Uo4w8A8oYkw - but can we also use wood gas for oxy-woodgas cutting? How about 6" PVC pipe for gas sto...") |
No edit summary |
||
| Line 1: | Line 1: | ||
We know of oxypropane cutting like this - https://www.youtube.com/watch?v=Uo4w8A8oYkw - but can we also use wood gas for oxy-woodgas cutting? How about 6" PVC pipe for gas storage as a battery of 20' long PVC tubes? The oxy-woodgas is exciting from the local resource perspective. Would we have to compress the wood gas to say 20 PSI so it has enough pressure to run a torch - or can we run the gas right out of the gasifier? The good news on oxyfuel is that the oxygen does most of the lancing, so the key is just getting the metal hot enough. One could cut metal literally only on the oxygen if the steel is really hot. | We know of oxypropane cutting like this - https://www.youtube.com/watch?v=Uo4w8A8oYkw - but can we also use wood gas for oxy-woodgas cutting? How about 6" PVC pipe for gas storage as a battery of 20' long PVC tubes? The oxy-woodgas is exciting from the local resource perspective. Would we have to compress the wood gas to say 20 PSI so it has enough pressure to run a torch - or can we run the gas right out of the gasifier? The good news on oxyfuel is that the oxygen does most of the lancing, so the key is just getting the metal hot enough. One could cut metal literally only on the oxygen if the steel is really hot. | ||
<html>https://www.youtube.com/watch?v=Uo4w8A8oYkw</html> | |||
Revision as of 20:18, 8 December 2014
We know of oxypropane cutting like this - https://www.youtube.com/watch?v=Uo4w8A8oYkw - but can we also use wood gas for oxy-woodgas cutting? How about 6" PVC pipe for gas storage as a battery of 20' long PVC tubes? The oxy-woodgas is exciting from the local resource perspective. Would we have to compress the wood gas to say 20 PSI so it has enough pressure to run a torch - or can we run the gas right out of the gasifier? The good news on oxyfuel is that the oxygen does most of the lancing, so the key is just getting the metal hot enough. One could cut metal literally only on the oxygen if the steel is really hot.
https://www.youtube.com/watch?v=Uo4w8A8oYkw