Bearings 101: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
*MIT Fundamentals of Design - [http://web.mit.edu/2.75/fundamentals/FUNdaMENTALs%20Book%20pdf/FUNdaMENTALs%20Topic%2010.PDF] - [[File:fundamentalsofdesign10.pdf]] | *MIT Fundamentals of Design - [http://web.mit.edu/2.75/fundamentals/FUNdaMENTALs%20Book%20pdf/FUNdaMENTALs%20Topic%2010.PDF] - [[File:fundamentalsofdesign10.pdf]] | ||
*Bearing Life - [http://machinedesign.com/bearings/meaning-bearing-life] | *Bearing Life - [http://machinedesign.com/bearings/meaning-bearing-life] | ||
*Peak loads - this source [http://www.ansonindustrial.com/bload1.html] says that peak loads should not exceed rated load by more than 100% | |||
Revision as of 14:43, 8 August 2015
Links
- Timken engineering manual - [file:///home/marcin/Desktop/Timken-Engineering-Manual.pdf]
- MIT Fundamentals of Design - [1] - File:Fundamentalsofdesign10.pdf
- Bearing Life - [2]
- Peak loads - this source [3] says that peak loads should not exceed rated load by more than 100%