The Liberator Master Bill of Materials: Difference between revisions
Jump to navigation
Jump to search
(Created page with ' Category:The Liberator Full Product Release') |
(BL) |
||
| Line 1: | Line 1: | ||
This is the complete materials list for the machine that we are building for Factor e Farm use: | |||
=Frame= | |||
*6" channel - 7/16" 13 lb per foot u-channel - | |||
=Arms= | |||
=Hydraulics= | |||
=Electronics= | |||
==Enclosure Box== | |||
*Box - Cutler and Hammer, product ID | |||
==Sensors== | |||
This is the assembly that includes the magnetic Hall Effect sensor, its encapsulation, and wire going up to the conroller box connection. | |||
==Controller== | |||
This is everything inside the controller, minus sensors, solenoid power leads, and main power cord - which plug into the controller through standard knockouts in the enclosure box. | |||
==Power Delivery and Cutoff== | |||
[[Category:The Liberator Full Product Release]] | [[Category:The Liberator Full Product Release]] | ||
Revision as of 05:28, 31 July 2010
This is the complete materials list for the machine that we are building for Factor e Farm use:
Frame
- 6" channel - 7/16" 13 lb per foot u-channel -
Arms
Hydraulics
Electronics
Enclosure Box
- Box - Cutler and Hammer, product ID
Sensors
This is the assembly that includes the magnetic Hall Effect sensor, its encapsulation, and wire going up to the conroller box connection.
Controller
This is everything inside the controller, minus sensors, solenoid power leads, and main power cord - which plug into the controller through standard knockouts in the enclosure box.