The Liberator Master Bill of Materials: Difference between revisions
Jump to navigation
Jump to search
(BL) |
(→Frame) |
||
| Line 1: | Line 1: | ||
This is the complete materials list for the machine that we are building for Factor e Farm use: | This is the complete materials list for the machine that we are building for Factor e Farm use: | ||
This is a functionally-descriptive list of the materials, with a summarized parts and cut list at the end. | |||
=Frame= | =Frame= | ||
*6" channel - 7/16" 13 lb per foot | ==Main Frame== | ||
Exact length is determined by the mounting of the cylinder. | |||
*6" wide structural u-channel - 7/16" thick, 13 lb per foot weight - one 20 foot long stick | |||
==Main Frame Fasteners== | |||
These are the 1/2" bolts that hold the desing-for-disassembly frame together. | |||
==Cylinder Alignment Guides== | |||
Thi | |||
=Arms= | =Arms= | ||
Revision as of 06:11, 31 July 2010
This is the complete materials list for the machine that we are building for Factor e Farm use:
This is a functionally-descriptive list of the materials, with a summarized parts and cut list at the end.
Frame
Main Frame
Exact length is determined by the mounting of the cylinder.
- 6" wide structural u-channel - 7/16" thick, 13 lb per foot weight - one 20 foot long stick
Main Frame Fasteners
These are the 1/2" bolts that hold the desing-for-disassembly frame together.
Cylinder Alignment Guides
Thi
Arms
Hydraulics
Electronics
Enclosure Box
- Box - Cutler and Hammer, product ID
Sensors
This is the assembly that includes the magnetic Hall Effect sensor, its encapsulation, and wire going up to the conroller box connection.
Controller
This is everything inside the controller, minus sensors, solenoid power leads, and main power cord - which plug into the controller through standard knockouts in the enclosure box.