Water Fittings STLs: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 2: | Line 2: | ||
*2" "PVC Cap" made from a lens cap with a weep hole. Not for water tight appliacations bc of weep hole. - Use this file - [http://www.thingiverse.com/thing:634] - with a scale factor of 1.2 in Cura. | *2" "PVC Cap" made from a lens cap with a weep hole. Not for water tight appliacations bc of weep hole. - Use this file - [http://www.thingiverse.com/thing:634] - with a scale factor of 1.2 in Cura. | ||
[[File:pvccap.jpg|thumb|PVC cap, 2". Sample application with cleanout for drainage tube in OSE's aquaponic greenhouse prototype.]] | [[File:pvccap.jpg|thumb|''PVC cap'' from black ABS, for 2" schedule 40 PVC. ID of cap is 62 mm, OD of 2"Schedule 40 PVC is 61 mm.Fit is tight. Sample application with cleanout for drainage tube in OSE's aquaponic greenhouse prototype.]] | ||
Revision as of 05:08, 7 April 2016
- Hose barb - http://www.thingiverse.com/thing:268333
- 2" "PVC Cap" made from a lens cap with a weep hole. Not for water tight appliacations bc of weep hole. - Use this file - [1] - with a scale factor of 1.2 in Cura.
