Talk:CEB Press v16.09/SCAD Files: Difference between revisions
Jump to navigation
Jump to search
| Line 27: | Line 27: | ||
due to the varriance in styles this needs to be a flexiible module | due to the varriance in styles this needs to be a flexiible module | ||
variables will be the height and width of the tab to be inserted, the gap to be left between the tab and the insert's wall, and 2 measurements for each corner cut. | variables will be the height and width of the tab to be inserted, the gap to be left between the tab and the insert's wall, and 2 measurements for each corner cut, and the depth of the corner cut from the rest of the cut. | ||
[[image:ceb_scadinsertdiagram.png]] | [[image:ceb_scadinsertdiagram.png]] | ||
Revision as of 01:23, 2 June 2017
TO DO
- do a full assembly
- notate which adjoining part corresponds with each cutout
- begin making design parametric - start a new "SCAD Files - Parametric" page
- Frame length and mounting hole dimensions based on cylinder
- set size of brick, drawer parts change to fit
- fix bugs in design
- standardize sizes where possible
- Layout for CNC
Design Suggestions
Frame
suggest adding new diagnal support part that welds between F5 and F4 to guarantee 90 degree weld and prevent bending under loads --Dorkmo (talk) 03:50, 31 May 2017 (CEST)
Design Method
Module Insert
a whole cut to allow for a matching tab to be placed within it and welded
due to the varriance in styles this needs to be a flexiible module
variables will be the height and width of the tab to be inserted, the gap to be left between the tab and the insert's wall, and 2 measurements for each corner cut, and the depth of the corner cut from the rest of the cut.
