D3D Lulzbot Cura: Difference between revisions
Jump to navigation
Jump to search
(→Files) |
No edit summary |
||
| Line 1: | Line 1: | ||
=Introduction= | =Introduction= | ||
[[Lulzbot Cura]] allows for ready setup of machines other than Lulzbot and Lulzbot Mini. By going to Expert-> Switch to Full Settings - you can set nozzle size and various parameters. Once all configuration has been input, you can save the profile as a .ini file. | [[Lulzbot Cura]] allows for ready setup of machines other than Lulzbot and Lulzbot Mini. As such, it is useful to use Lulzbot Cura for OSE's D3D 3D Printer. | ||
By going to Expert-> Switch to Full Settings - you can set nozzle size and various parameters. Once all configuration has been input, you can save the profile as a .ini file. | |||
To configure a new machine (bed size) go to the menu - Machine-> Add New Machine - you can add a profile for the D3D Original - 8" print bed. | To configure a new machine (bed size) go to the menu - Machine-> Add New Machine - you can add a profile for the D3D Original - 8" print bed. | ||
Revision as of 21:12, 9 June 2017
Introduction
Lulzbot Cura allows for ready setup of machines other than Lulzbot and Lulzbot Mini. As such, it is useful to use Lulzbot Cura for OSE's D3D 3D Printer.
By going to Expert-> Switch to Full Settings - you can set nozzle size and various parameters. Once all configuration has been input, you can save the profile as a .ini file.
To configure a new machine (bed size) go to the menu - Machine-> Add New Machine - you can add a profile for the D3D Original - 8" print bed.
Files
Configuration (.ini) file for D3D Lulzbot Cura:
File:D3DOriginal config.ini - D3D Original, 16" frame, 8" print bed, 0.5" nozzle.