Torch Table Log: Difference between revisions

Revision as of 15:39, 21 January 2011

Main > Digital Fabrication > RepLab Tools > Torch Table

2.21.09 - After reviewing the MechMate design for an open source router table, we decided to adapt a spring tensioning mechanism, v-groove bearings, and inverted gear rack for addressing debris issues. Jeremy is drawing up the new design. Marcin talked to Bryan Bishop, who is currently building out the bootstrapping Austin Fab Lab, and is the first open source fab lab we encountered outside of the Factor e Fab Lab.
2.16.09 - Development forum was set up - join here: [1]
2.13.09 - Jeremy updated 3D drawings; blogging about torch table; sent it for review to Jack C.*(
12.9.08 - Materials laid out in greenhouse. Blogged about it:

@@ Line 1: / Line 1: @@
+{{Template:Category=Torch Table}}
 *2.21.09 - After reviewing the [[MechMate]] design for an open source router table, we decided to adapt a spring tensioning mechanism, v-groove bearings, and inverted gear rack for addressing debris issues. Jeremy is drawing up the new design. Marcin talked to [[Bryan Bishop]], who is currently building out the bootstrapping Austin Fab Lab, and is the first open source fab lab we encountered outside of the [[Factor e Fab Lab]].
 *2.16.09 - Development forum was set up - join here: [http://www.globalswadeshi.net/group/opensourcetorchtable]