G-code: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
*M92 - sets feed rate, such as extruder - M92 E408 | *M92 - sets feed rate, such as extruder - M92 E408 | ||
*G92 - resets coordinates to given values [http://reprap.org/wiki/G-code#G92:_Set_Position] | *G92 - resets coordinates to given values [http://reprap.org/wiki/G-code#G92:_Set_Position] | ||
*G90 - set absolute positioning | |||
*G91 - set relative positioning | |||
Revision as of 02:52, 25 May 2018
- G1 E10 - spit 10 mm of filament
- M503 - prints parameters
- M92 - sets feed rate, such as extruder - M92 E408
- G92 - resets coordinates to given values [1]
- G90 - set absolute positioning
- G91 - set relative positioning