Marcin Printer Log: Difference between revisions
Jump to navigation
Jump to search
| Line 8: | Line 8: | ||
<nowiki>// Set the boundaries for probing (where the probe can reach). | <nowiki>// Set the boundaries for probing (where the probe can reach). | ||
#define LEFT_PROBE_BED_POSITION 70 //changed from 20 in Marlin v18.07 to 40 | #define LEFT_PROBE_BED_POSITION 70 //changed from 20 in Marlin v18.07 to 40 | ||
#define RIGHT_PROBE_BED_POSITION 170 //changed from 140 in Marlin v18.07 | #define RIGHT_PROBE_BED_POSITION 170 //changed from 140 in Marlin v18.07 | ||
#define FRONT_PROBE_BED_POSITION 40 //changed from 20 in Marlin v18.07 to 40 | #define FRONT_PROBE_BED_POSITION 40 //changed from 20 in Marlin v18.07 to 40 | ||
#define BACK_PROBE_BED_POSITION 150 | #define BACK_PROBE_BED_POSITION 150 | ||
</nowiki> | </nowiki> | ||
Revision as of 22:10, 8 November 2018
Printers
- 1 - 0.4 mm nozzle - prusa i3 mk2 extruder. 8x8 bed. Printer 1MJ Initialization File: File:Printer1mj.ini. Printer 1MJ Marlin - File:Printer1mjmarlin.zip
- 2 - 0.8 mm nozzle - prusa i3 mk2. 8x8 bed. Picture =
- 3 - 0.4 mm nozzle - prusa i3 mk2
- 4 - 0.4 mm nozzle - titan aero - see picture below. More pictures - [1]. Printer 4 MJ Initialization File: File:Printer4mj.ini. Printer 1MJ Marlin - Same as File:Marlin v1810.zip - but had to change the stock configuration to
// Set the boundaries for probing (where the probe can reach). #define LEFT_PROBE_BED_POSITION 70 //changed from 20 in Marlin v18.07 to 40 #define RIGHT_PROBE_BED_POSITION 170 //changed from 140 in Marlin v18.07 #define FRONT_PROBE_BED_POSITION 40 //changed from 20 in Marlin v18.07 to 40 #define BACK_PROBE_BED_POSITION 150
Form