3D Printer Quality Control: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
Line 1: Line 1:
=Electronics Testing Jigs=
=Quality Control Requirements=
To test 12 kits at a time, it is useful to set up rapid testing procedures for parts.
To test 12 kits at a time, it is useful to set up rapid testing procedures for parts.



Revision as of 20:26, 7 December 2018

Quality Control Requirements

To test 12 kits at a time, it is useful to set up rapid testing procedures for parts.

From the 3D Printer Packing List:

edit

Perfect Prints

To guarantee perfect prints, the following conditions must be met:

  1. Extruder steps per mm are correct. See Triffid Hunter's Calibration Guide
  2. Axes must be loose. See 3D Printer Manual - final assembly for procedure to mount axes

Corresponing Quality Control Steps for Perfect Prints

  1. E steps/mm must be done only once, and must be captured in Marlin or in Start G-Code
  2. Measure axis tightness using a force meter. Use a Digital Scale to record the force required to move an axis.


Links