RAMPS on 24V: Difference between revisions
Jump to navigation
Jump to search
(Created page with "*Simple - just cut off Arduino power, but need to feed Arduino with power in a different way. If using external heat bed mosfet - no other change needed. Still need to power t...") |
No edit summary |
||
| Line 4: | Line 4: | ||
https://reprap.org/wiki/RAMPS_24v | https://reprap.org/wiki/RAMPS_24v | ||
=BOM= | |||
*24V to 12V converter - 5A for using 12v heaters, fans - $14 for 10A - [https://www.amazon.com/Converter-Regulator-Reducer-Waterproof-SupplyTransformer/dp/B0756W6V4F?ref_=fsclp_pl_dp_4] | |||
*24V to 12 - 10A if include steppers - [https://www.amazon.com/EPBOWPT-Converter-Regulator-Module-Transformer/dp/B01LY4RANA/ref=mp_s_a_1_13?ie=UTF8&qid=1545426914&sr=8-13&pi=AC_SX236_SY340_FMwebp_QL65&keywords=5A+24+to+12v+converter] | |||
Revision as of 21:19, 21 December 2018
- Simple - just cut off Arduino power, but need to feed Arduino with power in a different way. If using external heat bed mosfet - no other change needed. Still need to power through heat bed part with 12V - but that power is minimal.
http://www.mythoughtspot.com/2017/09/18/modify-ramps-for-24-volts/
https://reprap.org/wiki/RAMPS_24v