RAMPS on 24V: Difference between revisions
Jump to navigation
Jump to search
(→BOM) |
|||
| Line 17: | Line 17: | ||
=BOM= | =BOM= | ||
*[[24V Power Supply]] | |||
*24V to 12V converter - 5A for using 12v heaters, fans - [https://www.amazon.com/EPBOWPT-Converter-Regulator-Module-Transformer/dp/B01LY4RANA/ref=mp_s_a_1_13?ie=UTF8&qid=1545426914&sr=8-13&pi=AC_SX236_SY340_FMwebp_QL65&keywords=5A+24+to+12v+converter] | *24V to 12V converter - 5A for using 12v heaters, fans - [https://www.amazon.com/EPBOWPT-Converter-Regulator-Module-Transformer/dp/B01LY4RANA/ref=mp_s_a_1_13?ie=UTF8&qid=1545426914&sr=8-13&pi=AC_SX236_SY340_FMwebp_QL65&keywords=5A+24+to+12v+converter] | ||
*$14 for 10A - [https://www.amazon.com/Converter-Regulator-Reducer-Waterproof-SupplyTransformer/dp/B0756W6V4F?ref_=fsclp_pl_dp_4] | *$14 for 10A - [https://www.amazon.com/Converter-Regulator-Reducer-Waterproof-SupplyTransformer/dp/B0756W6V4F?ref_=fsclp_pl_dp_4] | ||
Revision as of 17:05, 26 June 2019
Working Doc
Intro
- Cut off Arduino power, but need to feed Arduino with power in a different way.
- If using external heat bed mosfet - no other change needed.
- http://www.mythoughtspot.com/2017/09/18/modify-ramps-for-24-volts/
- https://reprap.org/wiki/RAMPS_24v
Do Stepper Motors Work Better at Higher Voltage?
- Steppers have less torque at higher speed
- Power of a stepper is constant - if power is torque x velocity, then torque decreases with higher velocity
- The mechanism for loss of torque is back EMF from inductance and back EMF from rotation
- With high velocity, back EMF of inductance is significant as a fraction of motor power. At high enough speed, inductance overtakes and motor stalls. This is the region when higher voltage allows stepper motor to overcome the effect of inductance. So at Max speed - higher voltage produces more torque for a stepper motor.
BOM
- 24V Power Supply
- 24V to 12V converter - 5A for using 12v heaters, fans - [1]
- $14 for 10A - [2]
Videos
Cut Off D1 Diode
Replace Automotive Fuse
See at minute 1:
Use Ferrules