RotoKnitic v19.01: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 23: | Line 23: | ||
[https://docs.google.com/drawings/d/1C2iLO4IXJmCDH09A349jZvGN7lp5rbjOS69YNhRg13s/edit google doc] | [https://docs.google.com/drawings/d/1C2iLO4IXJmCDH09A349jZvGN7lp5rbjOS69YNhRg13s/edit google doc] | ||
==Provisional BOM== | |||
*https://www.digikey.com/product-detail/en/pontiac-coil-inc/F0451A/527-1016-ND/668301 | |||
==Goals== | ==Goals== | ||
Revision as of 18:31, 29 June 2019
Using same parts and materials from OSE CircularKnitic v18.03, but switch mounting plates so that the mountain is stationary.
- requires spinning spool for fabric output
- allows for more multiple mountains and input threads
Design
- Needles will rotate in the needle holder
- https://github.com/OpenSourceEcology/circular_knitic_pick-a-needle
Concept
Standard
Pick-a-Needle
Provisional BOM
Goals
- change direction
- sock heels
Needle Accomidation
- pick-a-needle, optionally raise needles to an inactive postion
- Test laser cut needles, printed latch?
- Test 3D printed needles
Fabric Spool
- Apply constant tension on fabric
- Roll onto spool for easy handling and storage