Pipe Size: Difference between revisions
Jump to navigation
Jump to search
| Line 8: | Line 8: | ||
*http://www.engineeringtoolbox.com/ansi-steel-pipes-d_305.html. 1" schedule 40 may fit inside 1-1/4" schedule 40. | *http://www.engineeringtoolbox.com/ansi-steel-pipes-d_305.html. 1" schedule 40 may fit inside 1-1/4" schedule 40. | ||
*2" schedule 80 fits around 1-7/8" shaft - it is 1.939 ID, or 0.06 slop | *2" schedule 80 fits around 1-7/8" shaft - it is 1.939 ID, or 0.06 slop | ||
*2" Schedule 80 fits better around 1-15/16" shaft - see [[2" Schedule 80 Pipe]] | |||
=Notes on Couplers= | =Notes on Couplers= | ||
Revision as of 16:45, 25 September 2019
See table of standard pipe sizes up to XXH:
OD and ID
- http://www.engineeringtoolbox.com/ansi-steel-pipes-d_305.html. 1" schedule 40 may fit inside 1-1/4" schedule 40.
- 2" schedule 80 fits around 1-7/8" shaft - it is 1.939 ID, or 0.06 slop
- 2" Schedule 80 fits better around 1-15/16" shaft - see 2" Schedule 80 Pipe
Notes on Couplers
Pipe PSI
https://www.engineeringtoolbox.com/wrought-steel-pipe-bursting-pressure-d_1123.html