3D Printed Terminal Block: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=Single= Design rationale - wires are clamped against each other in a narrow slot using a standard bolt") |
(→Single) |
||
| Line 1: | Line 1: | ||
=Single= | =Single= | ||
Design rationale - wires are clamped against each other in a narrow slot using a standard bolt | Design rationale - wires are clamped against each other in a narrow slot using a standard 6 mm bolt. Bolt heads are energized. | ||
[[File:terminalblock.fcstd]] | |||
Revision as of 00:39, 1 October 2019
Single
Design rationale - wires are clamped against each other in a narrow slot using a standard 6 mm bolt. Bolt heads are energized.