Flexible Build Plate: Difference between revisions
Jump to navigation
Jump to search
(→Notes) |
(→Notes) |
||
| Line 7: | Line 7: | ||
*Buildtak does not provide enough adhesion for ABS without heat - [http://3dprintingforbeginners.com/buildtak-review/] | *Buildtak does not provide enough adhesion for ABS without heat - [http://3dprintingforbeginners.com/buildtak-review/] | ||
**But it '''recommends no heat with PLA''' | **But it '''recommends no heat with PLA''' | ||
**User review says works without heat all the time for PLA - [https://www.amazon.com/gp/customer-reviews/R3U04CK0JU6TQM/ref=cm_cr_dp_d_rvw_ttl?ie=UTF8&ASIN=B00MN5X304] | |||
*Spring steel plate is cheap at $3 for a 6"x6" plate from Amazon, 0.01" thick - [https://www.amazon.com/Spring-Steel-Sheet-Temper-Length/dp/B00065UZOU/ref=sr_1_3?keywords=spring+steel+plate&qid=1575512636&s=industrial&sr=1-3] | *Spring steel plate is cheap at $3 for a 6"x6" plate from Amazon, 0.01" thick - [https://www.amazon.com/Spring-Steel-Sheet-Temper-Length/dp/B00065UZOU/ref=sr_1_3?keywords=spring+steel+plate&qid=1575512636&s=industrial&sr=1-3] | ||
*0.012 thick is $2 for a 6x6" plate at McMaster. [https://www.mcmaster.com/9036k493] | *0.012 thick is $2 for a 6x6" plate at McMaster. [https://www.mcmaster.com/9036k493] | ||
Revision as of 03:36, 5 December 2019
- 120C - [1]
- 80C - [2]
- Magnetic plate for 105C is cheap, but textured spring steel PEI surface is not at $30 minimum - [3] - + PEI spring steel sheet - [4]
- 6x6" spring steel is $2 for 6"x6" sheet - [5]
Notes
- Buildtak does not provide enough adhesion for ABS without heat - [6]
- But it recommends no heat with PLA
- User review says works without heat all the time for PLA - [7]
- Spring steel plate is cheap at $3 for a 6"x6" plate from Amazon, 0.01" thick - [8]
- 0.012 thick is $2 for a 6x6" plate at McMaster. [9]
PEI and No Heat
- Plenty of use cases for using PEI without heat - [10]