Moarstruder: Difference between revisions
Jump to navigation
Jump to search
(→BOM) |
No edit summary |
||
| Line 1: | Line 1: | ||
=Introduction= | |||
The Moarstruder is a fast printing extruder for the Lulzbot printer that serves as a good benchmark for 3D printer extrusion rates. | |||
*https://www.lulzbot.com/store/tool-heads/lulzbot-taz-moarstruder-tool-head | *https://www.lulzbot.com/store/tool-heads/lulzbot-taz-moarstruder-tool-head | ||
*5 lbs per 24 hr print rate | *5 lbs per 24 hr print rate | ||
Latest revision as of 07:24, 16 December 2019
Introduction
The Moarstruder is a fast printing extruder for the Lulzbot printer that serves as a good benchmark for 3D printer extrusion rates.
- https://www.lulzbot.com/store/tool-heads/lulzbot-taz-moarstruder-tool-head
- 5 lbs per 24 hr print rate
CAD - from Lulzbot site [1]
- Nozzle - freeCAD - File:Moarstrudernozzle.fcstd
- Heater block - File:Moarstruderheaterblock.fcstd
BOM
- 117 parts for Moarstruder - File:MoarstruderBOM.ods
- About 4000 parts for MBOM inlcuding parts, shipping, supplies - essentially the entire business across product lines - 161 bolts alone. File:LulzbotmasterBOM.ods