MK7 Drive Gear: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(Created page with "https://jevonblog.wordpress.com/2015/01/27/extruder-design-the-mk7-drive-gear/")
 
No edit summary
 
Line 1: Line 1:
https://jevonblog.wordpress.com/2015/01/27/extruder-design-the-mk7-drive-gear/
https://jevonblog.wordpress.com/2015/01/27/extruder-design-the-mk7-drive-gear/ - about 11 mm diameter at the drive teeth. Or about 0.22". This makes the drive force of a 72 oz in motor about 20 lb assuming perfect gear meshing against the filament.

Latest revision as of 00:41, 28 December 2019

https://jevonblog.wordpress.com/2015/01/27/extruder-design-the-mk7-drive-gear/ - about 11 mm diameter at the drive teeth. Or about 0.22". This makes the drive force of a 72 oz in motor about 20 lb assuming perfect gear meshing against the filament.