Metal Rolling Concept: Difference between revisions
Jump to navigation
Jump to search
(Created page with "*Start with cast billets *Billets reheated via induction *Rollers roll out sheet from billet *Edges are formed by secondary rollers *Outcome: ability to make flat metal from scra...") |
No edit summary |
||
| Line 4: | Line 4: | ||
*Edges are formed by secondary rollers | *Edges are formed by secondary rollers | ||
*Outcome: ability to make flat metal from scrap | *Outcome: ability to make flat metal from scrap | ||
*Throughput of 2000 lb of metal per work day | |||
*1-2 operators are required | |||
*Economic value generated: at least $1000 per day | |||
*2000 square foot floor space, including wire and rod milling | |||
[[Category:Design Rationale]] | [[Category:Design Rationale]] | ||
Latest revision as of 03:25, 18 April 2011
- Start with cast billets
- Billets reheated via induction
- Rollers roll out sheet from billet
- Edges are formed by secondary rollers
- Outcome: ability to make flat metal from scrap
- Throughput of 2000 lb of metal per work day
- 1-2 operators are required
- Economic value generated: at least $1000 per day
- 2000 square foot floor space, including wire and rod milling