Revision as of 16:33, 2 May 2020

Intro

From E3D:

0.4 pack of 5 - [2]
0.6, 8, 1, 1.2 - [3]
Pre 2019 - Most of china has old style volcano heater blocks. Since 2019, v2 volcanos are common. This one appears to be the v2 version (clamp thermistor, not wire screwdown) - [4]
Titan aero hard hobs are available - [5]
Regular steel hobs are available - [6]
Here are socks - [7]
High temperature copper heater blocks are available - [8]
Brass blocks are available - [9]

@@ Line 1: / Line 1: @@
 =Intro=
-*Shopping page for nozzles, heat break - http://e3d-online.com/E3D-v6
-:*Both 1.75 and 3 mm nozzles are available in the Volcano Nozzle style. 1.75mm doesn't make sense as the filament velocity would be too fast?
-*Wiki documentation on Volcano- [https://wiki.e3d-online.com/wiki/E3D-v6_(Volcano)_Documentation]
-*Hot end assembly guide - [https://wiki.e3d-online.com/wiki/E3D-v6_Assembly#HotSide]
-*Video:
-<html><iframe width="560" height="315" src="https://www.youtube.com/embed/zcrnElHjfeQ" frameborder="0" allowfullscreen></iframe></html>
-*Tom's Guide Review -