CEB Press/Manufacturing Instructions/Frame with main cylinder: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 5: | Line 5: | ||
== Materials Required == | == Materials Required == | ||
*6 inch heavy (7/16") u-channel - ( 20 ft ) | *6 inch heavy (7/16") u-channel - ( 20 ft ) | ||
*bolts | *bolts | ||
*3”x3”x1/2” (8) (cylinder mounts for both cylinders) | *3”x3”x1/2” (8) (cylinder mounts for both cylinders) | ||
*1” shaft, 6” long (main cylinder mount) | *1” shaft, 6” long (main cylinder mount) | ||
| Line 21: | Line 18: | ||
== Fabrication Steps == | == Fabrication Steps == | ||
===Step 1: Cut pieces=== | |||
[[Image: | 1. [[Image:channel.jpg|thumb|Step 1. Torch or cold-cut channel to size]] | ||
1. Torch or cold-cut channel to size | |||
*2 pieces, 40 3/4" | *2 pieces, 40 3/4" | ||
*4 pieces, 18" | *4 pieces, 18" | ||
| Line 32: | Line 27: | ||
*2 pieces 1/4”x10”x18” (bent 1.5” off the edge the long way) | *2 pieces 1/4”x10”x18” (bent 1.5” off the edge the long way) | ||
===Step 2: Punch holes=== | |||
[[Image:punchedholes.jpg|thumb|Step 2]] | |||
===Step 3: Bolt pieces together=== | |||
[[Image:Framestanding.jpg|thumb| Step 3]] | |||
3 | |||
===Step 4: Prepare Hydraulic Cylinder=== | |||
Revision as of 19:54, 24 April 2011
Tools Required
- torch
- hole punch
Materials Required
- 6 inch heavy (7/16") u-channel - ( 20 ft )
- bolts
- 3”x3”x1/2” (8) (cylinder mounts for both cylinders)
- 1” shaft, 6” long (main cylinder mount)
Diagram and video explantion
Fabrication Steps
Step 1: Cut pieces
1.
- 2 pieces, 40 3/4"
- 4 pieces, 18"
- 2 pieces, 26"
bend:
- 2 pieces 1/4”x10”x18” (bent 1.5” off the edge the long way)
