Production Log: Difference between revisions
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
*One corner piece cracked (with tab) | *One corner piece cracked (with tab) | ||
*Katie, David, and his wife | *Katie, David, and his wife | ||
*Rods | *Rods chamfered in about 30 minutes - for 4 machines - Katie | ||
*Axes started at 2:24. | *Axes started at 2:24. | ||
*10 axes done (minus 2 idlers) in 1.5 hours. Includes set screw set into 14 bottom and 14 top pieces for mounting Z axis. | *10 axes done (minus 2 idlers) in 1.5 hours. Includes set screw set into 14 bottom and 14 top pieces for mounting Z axis. | ||
*Working on 1 pro kit, 1 pro upgrade, 1 Pro 2 build, 1 Pro 2 Upgrade, and 2 Pro 3s. | |||
*Working on 6 kits total | |||
=Fri Jul 31, 2020= | =Fri Jul 31, 2020= | ||
Revision as of 01:33, 2 August 2020
Sat Aug 1, 2020
- 4 people total - 2:24 starting at noon - 2:24 hours to do 4 frames: 1 small, 1 Pro 2, 2 Pro 3, with mistakes and taking things apart.
- One corner piece cracked (with tab)
- Katie, David, and his wife
- Rods chamfered in about 30 minutes - for 4 machines - Katie
- Axes started at 2:24.
- 10 axes done (minus 2 idlers) in 1.5 hours. Includes set screw set into 14 bottom and 14 top pieces for mounting Z axis.
- Working on 1 pro kit, 1 pro upgrade, 1 Pro 2 build, 1 Pro 2 Upgrade, and 2 Pro 3s.
- Working on 6 kits total
Fri Jul 31, 2020
- Printing 5 sets of parts - 1 Pro upgrade, 2 Pro, Pro 2, and Pro 3. 5 total.
- Upgrading all printers to Universal Gearless Extruder.
Failures Log
- [1] Layer shift on corner piece - using D3D v19.06 4 - with Titan Aero extruder