Workshop Best Practice: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=Build Technique= *For metal work, grind anything you torched prior to any fitting or assempby. Otherwise slag doesn't let you align things. *Check corners after grinding from...") |
|||
| Line 3: | Line 3: | ||
*Check corners after grinding from torching - that the slag has been removed completely - and that little slivers of slag are not there | *Check corners after grinding from torching - that the slag has been removed completely - and that little slivers of slag are not there | ||
*After finish welding, check all corners and edges and bring down sharp points so others don't get cuts in the future | *After finish welding, check all corners and edges and bring down sharp points so others don't get cuts in the future | ||
*Prior to working with any metal with slag - use 15 A grinder to remove slag. | |||
=Organization= | =Organization= | ||
*Organize workshop by sections of related parts. | *Organize workshop by sections of related parts. | ||
Latest revision as of 19:07, 27 November 2021
Build Technique
- For metal work, grind anything you torched prior to any fitting or assempby. Otherwise slag doesn't let you align things.
- Check corners after grinding from torching - that the slag has been removed completely - and that little slivers of slag are not there
- After finish welding, check all corners and edges and bring down sharp points so others don't get cuts in the future
- Prior to working with any metal with slag - use 15 A grinder to remove slag.
Organization
- Organize workshop by sections of related parts.
- Use Visual Workshop techniques
Documentation
- At the end of the day, document Learnings or Data on your log.