Revision as of 00:40, 23 January 2022

Basics

An advanced FDM 3D Printer Firmware
"Klipper is a 3d-Printer firmware. It combines the power of a general purpose computer with one or more micro-controllers." (The Project's Website)

Input Shaping (Reduces Ringing (3D Printing Artifact) )
Pressure Advance Tuning
Capable of handling more complex Kinematics such as Delta Printers , CoreXY Printers etc
High precision stepper movement
High Steps Per Second
Support for multiple micro-controllers, such as in Toolheads with integrated control boards

1.) A Single Board Computer (or in theory at least a used low-spec computer acquired for cheap?)
- Typically:
  - A Raspberry Pi Zero if not utilizing 3D Printer Webcam functionalities
  - A Raspberry Pi (need to grab what model is recommended, 2/3/4 etc) if utilizing the camera and/or other more intensive features
2.) A Standard Control Board (This no longer does the calculations of G Code to various electronics as this is offloaded to the Raspberry Pi)
(Optional) 3.) A Klipperscreen ( Raspberry Pi Touchscreen + (Most Likely 3D Printed) Enclosure + Wiring )

@@ Line 2: / Line 2: @@
 *An advanced FDM 3D Printer Firmware
 *"Klipper is a 3d-Printer firmware. It combines the power of a general purpose computer with one or more micro-controllers." (The Project's Website)
+=Notable Features=
+*[[Input Shaping]] (Reduces [[Ringing (3D Printing Artifact) ]] )
+*[[Pressure Advance Tuning]]
+*Capable of handling more complex Kinematics such as [[Delta Printers]] ,  [[CoreXY Printers]] etc
+*High precision stepper movement
+*High [[Steps Per Second]]
+*Support for multiple micro-controllers, such as in [[Toolheads]] with integrated control boards
 =Hardware=