Nail Gun Nails: Difference between revisions
Jump to navigation
Jump to search
Line 21: | Line 21: | ||
=Scrails= | =Scrails= | ||
Then make them coiled and plastic strip. Ideally, a coil version could be used in a coil siding gun for trim attachment, and a plastic strip could be used | Then make them coiled and plastic strip. Ideally, a coil version could be used in a coil siding gun for trim attachment, and a plastic strip could be used. Future work: scrail, metal connector type, to 2.5" for trim, trim angle, and metal connnectors. | ||
*Removable like a screw, but is shot in. Fasco [https://hw.menardc.com/main/items/media/FASCO001/Prod_Tech_Spec/SCRAILTechSheet.pdf]. | *Removable like a screw, but is shot in. Fasco [https://hw.menardc.com/main/items/media/FASCO001/Prod_Tech_Spec/SCRAILTechSheet.pdf]. | ||
*{{check}}2.5" .113 Versadrive, exterior rated. Plastic strip. [https://www.menards.com/main/hardware/fasteners-connectors/collated-nails-screws-staples/collated-nails-cleats/scrail-reg-2-1-2-x-113-33-deg-plastic-strip-nail-screw-fastener/scps21213cvfc/p-1444430345434-c-19718.htm?tid=7019774275803778801&ipos=8] | *{{check}}2.5" .113 Versadrive, exterior rated. Plastic strip. [https://www.menards.com/main/hardware/fasteners-connectors/collated-nails-screws-staples/collated-nails-cleats/scrail-reg-2-1-2-x-113-33-deg-plastic-strip-nail-screw-fastener/scps21213cvfc/p-1444430345434-c-19718.htm?tid=7019774275803778801&ipos=8] | ||
*1.75" .113 shank 15 degree star drive. Coil. [https://www.homedepot.com/p/Scrail-1-3-4-in-x-1-9-in-15-Degree-Plastic-Sheet-Coil-Torx-Head-Nail-Screw-Fastener-2-000-Pack-SCMP513FTFC/203119206] | *{{check}}1.75" .113 shank 15 degree star drive. Coil. [https://www.homedepot.com/p/Scrail-1-3-4-in-x-1-9-in-15-Degree-Plastic-Sheet-Coil-Torx-Head-Nail-Screw-Fastener-2-000-Pack-SCMP513FTFC/203119206]. If this were to work in a cordless coil siding nailer, that would be ideal. If not, that should be designed. | ||
=Links= | =Links= | ||
*[[Nail Guns]] | *[[Nail Guns]] |
Revision as of 20:45, 25 February 2023
30-34°
Concept here is to use a metal connector gun for predrilled holes.
Metal Connector
1.5" .148 galv 4.5 cents menards [1]
- 1.5" metal connector Menards $40 for 1000, Grip-Fast - 0.148 shank - 4 cents - [2]
- Bostitch at Menards, 1.5" metal connector - .148 shank - galvanized - 5.5 cents -[3]
- Bostitch not galvanized, .148 - 4.5 cents - [4]
- 1.5" metal connector - .148 shank - 4.1 cents - [5]
- 2.5" Bostitch metal connector 500 for $32 0.148 - 6 cents - [6]
- Bostitch 1000 $67 1.5" 0.131 - 6.7 cents - [7]
Non-Metal Connector
15°
For cordless siding gun. Can use cordless siding gun for trim. If using scrails, this qualifies for lifetime design in removing trim or other removable parts.
Menards - 1.75" 0.08 coil, 4200 nails, $75 - 1.8 cents - [8]
- Lowes 2500 1.75", 0.092 gauge - Metabo coil [9]
- See 15 deg scrails below. There are plastic strip 30° scrails as well.
Scrails
Then make them coiled and plastic strip. Ideally, a coil version could be used in a coil siding gun for trim attachment, and a plastic strip could be used. Future work: scrail, metal connector type, to 2.5" for trim, trim angle, and metal connnectors.
- Removable like a screw, but is shot in. Fasco [10].
2.5" .113 Versadrive, exterior rated. Plastic strip. [11]
1.75" .113 shank 15 degree star drive. Coil. [12]. If this were to work in a cordless coil siding nailer, that would be ideal. If not, that should be designed.