Hydraulic Motors

Low Cost

• $150, 1500 in lb [1], 14 hp. Npte that the heaviest [2] are only about 16 hp for 3x the cost (of course with higher torque).

PTO Motors

• See PTO Motors

High Speed

• 1 cu in, 3000 RPM cont, 2500 PSI, 15 GPM requirement, 5/8" shaft - $220 - [3]
• 1.5 cu in, 7/8 13T spline - 20 gpm for 3000 RPM - $130 - [4]. Needs coupler - [5]

High Torque

• BMER-2-250 - 6000 in lb [6]. 1.25" taper. With castille nut, easier mounting. But CCW rotation, not reversible?
• BMER-2-250- taper or straight - $330 - [7]
• Note you can get BMER-2-350 for just a little more, at 33% extra torque.
• Bailey, 6000 in lb , $350 [8]
• 14 cu in 6000 in lb, $330 [9]
• 13k in lb - $1300 - Charu-Lynn [10]
• 9000 in lb $549 [11]. BMER1-540

3000 In Lb Range

• 15 cu in gerotor - 3300 in lb - $135 new but stay away from poor seller - [12]
• Note - these are much cheaper than the 5000 in lb + range.
• $109 - 3000 in lb [13] no case drain.
• BMPH 200 series - $169 - 3100 in lb - [14] but has case drain.
• Note that the 9.59 cu in PTO motor is in the range - [15]
• BMP400 - 23 cu in - 4200 in lb - $180 - [16]

BMER-2 Specs

• Tech sheet - [17]

Part Numbers

• Motor Types - [18]
• BMER 2 - ex 9000 in lb - BMER 2 750 - [19]. BMER2-750 - https://www.onehydraulics.com/products/bmer-2-750-fs-g2-s-r]. BMER2-125 is smallest - 3000 in lb - [20]
  • BMER 1 230 and up is 5000 in lb [21]
• BMH 500 - 7000 in lb - [22]
• BMK 6 1000 - 15000 in lb - [23]
• BMPH 400 - 3000 in lb and $200 [24]. Or up to 4000 psi. [25]
• BMSY 400 - 8000 in lb [26]
• BMT 250 to 800 is good - 5000 in lb to 12000 in lb [27]
• BMV series are large mothers - 40 gpm and 8000-16000 in lb [28]