CEB Hopper CAD: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
[[Image:hoppercad1.jpg]] | [[Image:hoppercad1.jpg]] | ||
Note: It is possible to cut the entire hopper from a 5'x10' sheet of 1/8" metal - thought the upper corners are cut off as shown. This is not problematic. | Note: It is possible to cut the entire hopper from a 5'x10' sheet of 1/8" metal - thought the upper corners are cut off as shown. This is not problematic. The following shows the pattern of cut from a 5x10 sheet: | ||
[[Image:hoppercad2.jpg]] | [[Image:hoppercad2.jpg]] | ||
Revision as of 19:42, 28 May 2011
Note: It is possible to cut the entire hopper from a 5'x10' sheet of 1/8" metal - thought the upper corners are cut off as shown. This is not problematic. The following shows the pattern of cut from a 5x10 sheet:
