Quick DXF to G-Code Conversion Instructions: Difference between revisions
Jump to navigation
Jump to search
(Created page with "Under Coordinates, set all start at and Z values to 0, G1 feed Z-direction 150, G1 feed xy direction - 10. This works well for 1/2" steel plate. Under File Beg. & End - change G...") |
No edit summary |
||
| Line 6: | Line 6: | ||
Keep your DXF in the (x,y) > (0,0) coordinate quadrant. | Keep your DXF in the (x,y) > (0,0) coordinate quadrant. | ||
Download vanngcode.py converter script from Open Pario under Power Cube files, CAM section. | |||
Follow directions shown in | |||
[[Category:G-Code]] | [[Category:G-Code]] | ||
Revision as of 01:07, 15 June 2011
Under Coordinates, set all start at and Z values to 0, G1 feed Z-direction 150, G1 feed xy direction - 10. This works well for 1/2" steel plate.
Under File Beg. & End - change G21 to G20 for inch units.
Import DXF, then export G-Code.
Keep your DXF in the (x,y) > (0,0) coordinate quadrant.
Download vanngcode.py converter script from Open Pario under Power Cube files, CAM section.
Follow directions shown in