Mount Wheels: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=Wheel Mounting Plates= *Prepare wheel mounting plates, 4 per tractor - 1/2"x8"x10" *Download CAM files for wheel plates -[http://openpario.mime.oregonstate.edu/documents/1237] ...") |
No edit summary |
||
| Line 1: | Line 1: | ||
*Prepare wheel mounting plates, 4 per tractor - 1/2"x8"x10" | *Prepare wheel mounting plates, 4 per tractor - 1/2"x8"x10" | ||
*Download CAM files for wheel plates -[http://openpario.mime.oregonstate.edu/documents/1237] | *Download CAM files for wheel plates -[http://openpario.mime.oregonstate.edu/documents/1237] | ||
| Line 7: | Line 5: | ||
*Cut gussets - right angle triangles with 4" legs - 4 per wheel | *Cut gussets - right angle triangles with 4" legs - 4 per wheel | ||
*Weld gussets onto plates | *Weld gussets onto plates | ||
[[Category:Fabrication Procedures]] | |||
Revision as of 01:49, 19 June 2011
- Prepare wheel mounting plates, 4 per tractor - 1/2"x8"x10"
- Download CAM files for wheel plates -[1]
- Configure LinuxCNC
- Torch out plates (or cut by hand)
- Cut gussets - right angle triangles with 4" legs - 4 per wheel
- Weld gussets onto plates