CEB Press/Manufacturing Instructions/Arms - secondary: Difference between revisions
Jump to navigation
Jump to search
| Line 13: | Line 13: | ||
== Fabrication Steps == | == Fabrication Steps == | ||
*Clamp one arm to each side of the primary arms, the 6" side to the underside of the primary arms, with the 4" side on the outside. | |||
*Torch thru the holes on the primary arms to make two 3/4" holes on each secondary arm. | |||
Revision as of 18:05, 11 August 2011
Main > Housing and construction > CEB Press > CEB press building instructions
Tools Required
Cutting Torch
Materials Required
- 2 pieces 72" long - 4"x6"x3/8" angle steel
Diagrams
Fabrication Steps
- Clamp one arm to each side of the primary arms, the 6" side to the underside of the primary arms, with the 4" side on the outside.
- Torch thru the holes on the primary arms to make two 3/4" holes on each secondary arm.