Temporary Hay House: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
Line 12: Line 12:
*10 3'x17' barn roof panels
*10 3'x17' barn roof panels


Building these modular roof frames is described in instructions for the [[Hab Lab]] and the [[OSE Shop 2011|Workshop]].
Building these modular roof frames is described in instructions for the [[OSE Shop 2011|Workshop]] and the [[Hab Lab]].
Hay is cut and baled on the farm - in this case planned for use as wall insulation for the [[Hab Lab]].
Hay is cut and baled on the farm - in this case planned for use as wall insulation for the [[Hab Lab]].
A stack of roof panels was on site already, in anticipation of their use to finish the [[Hab Lab]] and [[OSE Shop 2011|Workshop]] roofs.
A stack of roof panels was on site already, in anticipation of their use to finish the [[Hab Lab]] and [[OSE Shop 2011|Workshop]] roofs.

Revision as of 18:32, 7 October 2011

Design

This little house is designed solely as a temporary shelter.

  • It is quickly constructed.
  • It uses components already on site.
  • The structure is intended to be dismantled and its components incorporated in finishing another building project.
Hay Bale Shelter.jpg
3-D model.jpg

Components

  • 3 16'x16' prebuilt roof frames
  • 100 hay bales (about 14"x18"x4')
  • 10 3'x17' barn roof panels

Building these modular roof frames is described in instructions for the Workshop and the Hab Lab. Hay is cut and baled on the farm - in this case planned for use as wall insulation for the Hab Lab. A stack of roof panels was on site already, in anticipation of their use to finish the Hab Lab and Workshop roofs.

Instructions

Time and Cost